For those who need a larger production size machine, all three models of the 200 Series carders are available as doublewides. These models have drums twice as wide as their singlewide counterparts.
Other than size, the 200 Series doublewides have the identical features and benefits as the singlewide versions.
As with the singlewide, because of the four inch frame height, a motorized Series 200 doublewide is NOT available.
Our mid-range Strauch chain drive drum carder is made from solid ash with a Watco Danish oil finish and as with all Strauch drum carders comes standard with the Brush Attachment. The three working tools (Batt picker, doffer brush, dabber brush) are included with each carder.
The 200 Series drum carders are the only series that comes with a choice of carding cloth for the large drum: fine, medium, and coarse.
Model DC-205 with the 05 fine-128 tpi.cloth. Designed to handle ALL fibers including merino, llama, alpaca, cashmere, dog hair and other exotics.
For those with specialized carding needs, there are two coarser styles of card cloth available for the carding drum (the large drum). All cloth uses 3/8" long plated steel wire in a tough rubberized cloth backing. The price for either of these two carders is the same as the DC205:
Model DC-203 with the 03 medium-98 tpi.cloth. Can be used successfully for coarse to middle range fiber such as Cheviot and Romney as well as adult mohair. Useful for long fibers such as Border Leicester to get a deep batt. NOT recommended for finer fibers.
Model DC-202 with the 02 coarse-72 tpi.cloth. For very coarse fibers specifically for felting.
The 200 Series uses a smaller sprocket yielding a turning ratio of 4:1. Because of this the frame height is 4" and therefore this carder has to be at the edge of the work surface, allowing the crank to clear the table.
Also, due the frame height, a motorized version is NOT available. If you are planning in the future on having a motorized carder, consider the Finest. It can be upgraded at a later time.
Table clamps and Teasing Tool are available separately.
**This item will drop ship via UPS automatically from Strauch Fiber Equipment Company which is located in New Castle, VA. You will be charged a flat shipping rate and will be refunded if the actual shipping cost is higher than a $10 difference from actual costs paid. FOR ORDERS OUTSIDE OF THE CONTIGUOUS 48 STATES: If you live outside of the contiguous 48 and tried to add this item to your cart, you may have noticed a shipping rate of $1,000. The good news? It won't cost $1,000 to ship. The bad news? You need to take an extra minute to please email email@example.com for a shipping quote.
24" long, 18 1/2" wide, 4" high
Solid Ash, Watco Danish Oil finish
Must be at the edge of the table surface
7" in diameter x 15 1/4" wide
128 tpi carding cloth with 3/8" long pins
2" in diameter x 16" wide
Unique smooth-blade Slicker-Licker cloth
Approximately 15" wide x 22" long